Before 2016 2016 2019 2020 2021 2022 2023 2024
2024
Production of Ti/Ti6Al4V Layer Material By Sinter Bonding
Durak R., Avcu E., Yamanoğlu R.
5. Uluslararası Selçuk Bilimsel Araştırmalar Kongresi, 2024, Turkey (online oral presentation)
Asit Dağlama İle Ti Esaslı Biyomedikal Malzemelerin Yüzey Özelliklerinin Geliştirilmesi
Durak R., Avcu E., Yamanoğlu R.
Eu 6th Internatıonal Conference on Health, Engineering and Applied Sciences, 2024, Turkey (online oral presentation)
Basınç Destekli Sinterleme İle Üretilen Kompozisyonel Derecelelendirilmiş Grafit Takviyeli Ti6Al4V Metal Matris Kompozitlerin Mikroyapisal Karakterizasyonu
Gökalp İ, Duygulu Ö, Avcu Y.Y., Avcu E., Yamanoğlu R.
4th International Symposium on Characterization, 2024, Turkey (online oral presentation)
Titanyum Matrisli Kompozitlerin Üretim Yöntemleri Üzerine Bir Derleme
Çalım E., Armağan M., Avcu Y.Y., Avcu E.
4. Bilsel International Harput Scientific Researches Congress, 2024, Turkey (online oral presentation)
Kompozisyonel Derecelendirilmiş Ti6Al4V/Grafit Kompozitlerin Geçirimli Elektron Mikroskobu İle İleri Mikroyapisal Karakterizasyonu
Gökalp İ., Duygulu Ö., Avcu Y.Y., Avcu E., Yamanoğlu R.
2. International Üsküdar Scientific Research and Innovation Congress, 2024, Turkey (Oral presentation)
2023
Effects of Standoff Distance and Processing Duration Parameters on Primary Deformation Zone in Water Jet Peening of Ti6Al4V Alloy
Armagan M., Calim E., Yavuzyegit B., Avcu Y.Y., Abakay E., Avcu E.
8. Asia Pacific International Modern Sciences Congress, 11 – 12 September 2023, India (online oral presentation)
Surface Roughening of Ti6Al4V Alloy by Water Jet Shot Peening: Effects of Processing Distance, Peening Time and Shot Mass Flow Rate Parameters
Armagan M., Calim E., Yavuzyegit B., Avcu Y.Y., Abakay E., Avcu E.
2. International Trakya Scientific Research Congress, 12 – 13 August 2023, Edirne, Turkey (online oral presentation)
Improvement of Surface and Subsurface Properties of Materials by Water Jet Shot Peening
Armagan M., Calim E., Avcu Y.Y., Abakay E., Yamanoglu R., Guney M., Avcu E.
3. International Congress on Contemporary Scientific Research, 07 – 08 August 2023, Adana, Turkey (online oral presentation)
Investigation of Surface and Hardness Properties of Shot-Peened Powder Metallurgical Ti10Mo5Fe Alloy
Calim E., Avcu Y.Y., Iakovakis E., Abakay E., Yamanoglu R., Armagan M., Guney M., Avcu E.
11th International Congress on Engineering, Architecture, and Design, 10-15 June 2023, Istanbul, Turkey (online oral presentation)
Influence of shot peening on surface morphology, topography, and subsurface hardness of Ti13Nb13Zr alloy
Calim E., Avcu Y.Y., Iakovakis E., Abakay E., Yamanoglu R., Armagan M., Guney M., Avcu E.
Cukurova 10th International Scientific Research Conference, 2-4 April 2023, Adana, Turkey (online oral presentation)
Investigation of surface and subsurface mechanical properties of shot peened biomedical titanium alloys
Calim E., Avcu Y.Y., Iakovakis E., Abakay E., Yamanoglu R., Koc F.G., Guney M., Avcu E.
2nd International Conference on Scientific and Academic Research, 14-16 March 2023, Konya, Turkey (online oral presentation)
Toz metalurjik Ti6Al4V alaşımının bilyalı dövme sonrası yüzey ve yüzey altı mekanik ve mikroyapısal özelliklerinin incelenmesi
Çalım E., Avcu Y.Y., Iakovakis E., Abakay E., Yamanoğlu R., Koç F.G., Güney M., Avcu E.
2. International Conference on Scientific and Academic Research, 14-16 March 2023, Turkey (online oral presentation)
Examining Surface Morphology of Manganese Aluminum Bronze Alloy Eroded at Different Cavitation Angles of Attack
Tini S., Zeren A., Avcu Y.Y., Abakay E., Avcu E.
6th International Science and Innovation Congress, 25-26 February 2023, Ankara, Turkey (online oral presentation)
Examining dimensions and surfacemorphologies of micro surface patterns produced by electrical discharge machining on commercially pure titanium alloy
Armagan M., Balta A.K., Avcu Y.Y., Abakay E., Avcu E.
9th International Zeugma Conference on Scientific Research, 19-21 February 2023, Gaziantep, Turkey (online oral presentation)
Investigation of the Effect of Cavitation Angle of Attack on Cavitation Erosion Behavior of Manganese Aluminum Bronze Alloys by Optical Profilometer
Tini S., Zeren A., Avcu Y.Y., Abakay E., Avcu E.
2nd International Conference on Innovative Academic Studies, 28-31 January 2023, Konya, Turkey (online oral presentation)
2022
Investigation of the Parameters Affecting the Cavitation Erosion Behavior of Manganese Aluminum Bronze (MAB-Cu4) Alloy with Taguchi Experiment Design
Tini S., Zeren A., Avcu Y.Y., Avcu E.
4th International Scientific Research and Innovation Congress, 25-26 December 2022, Istanbul, Turkey(online oral presentation)
Investigation of Tensile Behaviour of Shot Peened AA1050 Aluminium Alloy
Bala B., Sonmez F., Avcu Y.Y., Abakay E., Karakulak E., Avcu E.
3rd International Hasankeyf Scientific Studies and Innovation Congress, Batman, Turkey, 17-18 Decemeber 2022 (online oral presentation)
Obtaining micro surface patterns in Ti6Al4V alloy by electrical discharge machining
Balta A.K., Armagan M., Avcu Y.Y., Avcu E.
8th International Congress on Innovative Scientific Approaches, 23-24 November 2022, Samsun, Turkey (online oral presentation)
Design of a cavitation test rig and experimental study
Tini S.C., Avcu Y.Y., Zeren A., Avcu E.
5th International Sciences and Innovation Congress (ISARC), 11-12 November 2022, Ankara, Turkey (online oral presentation)
Investigation of Dry Friction Behavior of Surface Textured Powder Metallurgical Commercially Pure Titanium Alloy
Ozkilinc A., Yildiran Avcu Y., Yamanoglu R., Avcu E.
4th Al Farabi International Congress on Applied Sciences, 19-20 August 2022, Erzurum, Turkey (online oral presentation)
Obtaining Patterned Surface Topographies and Analyzing Surface Properties in Powder Metallurgical Pure Titanium Alloy
Avcu Y.Y., Ozkilinc A., Guney M., Avcu E.
4th International Ankara Multidisciplinary Studies Congress, 29-31 July 2022, Ankara, Turkiye (online oral presentation)
Processing special surface patterns with shot peening on biomedical Ti6Al4V alloy to improve surface properties
Bahadir M.I., Avcu Y.Y., Calim E., Koc F.G., Uzuner H., Yamanoglu R., Sonmez F., Guney M., Avcu E.
Ege 5th Conference on Applied Sciences, 21-22 May 2022, Izmir, Turkey (online oral presentation)
Effect of mechanical & chemical surface treatments on adhesion strength of steel-rubber bond
Sonmez F., Gunsoy C., Avcu E.
4th International Engineering Research Symposium (INERS’22), 04-06 March 2022, Duzce, Turkey (online oral presentation)
2021
Investigation of mechanical and surface properties of AA7075 alloy shot peened with glass beads
Yetik O., Avcu Y.Y., Guney M., Avcu E.
3rd International Turkic World Congress on Science and Engineering (TURK-COSE 2021),14-15 June 2021, Nigde, Turkey, (online oral presentation)
Airborne Particulate Matter: How Techniques for Physicochemical Analysis Can Help us Predict Adverse Human Health Impacts of Air Pollution
Agibayeva A., Kumisbek A., Karaca F., Avcu E., Guney M.
3rd International Turkic World Congress on Science and Engineering (TURK-COSE 2021),14-15 June 2021, Nigde, Turkey, (online oral presentation)
Potentially Toxic Elements in Airborne Particulate Matter: How Assessing Their Solubility May Improve the Characterization of Adverse Human Health Impacts
Agibayeva A., Kumisbek A., Karaca F., Avcu E., Guney M.
3rd International Turkic World Congress on Science and Engineering (TURK-COSE 2021),14-15 June 2021, Nigde, Turkey, (online oral presentation)
2020
Modification of Surface Properties of Shot Peened Ti6Al4V Alloy by Grit Blasting
Avcu Y.Y., Yetik O., Guney M., Sinmazcelik T, Avcu E.
IMASCON 2020 Spring – 4th International Marmara Sciences Congress, 19 – 20 June 2020, Kocaeli, Turkey (online oral presentation)
Investigation Of Sub-Surface Properties of Shot Peened AA1050 Alloy
Gonul B., Yetik O., Avcu Y.Y., Sonmez F., Guney M., Avcu E.
IMASCON 2020 Spring, 19 – 20 June 2020, Kocaeli, Turkey (online oral presentation)
Effect of Shot Peening Parameters on Surface Morphology of AA1050 Aluminum Alloy
Gonul B., Yetik O., Avcu Y.Y., Sonmez F., Guney M., Avcu E.
IMASCON 2020 Spring, 19 – 20 June 2020, Kocaeli, Turkey (online oral presentation)
2019
Adhesive Wear Behavior of Ti6Al4V Alloy Shot Peened under Different Parameters
Avcu Y.Y., Yetik O., Iakovakis E., Guney M., Avcu E., Sinmazcelik T.
IMASCON 2019 Autumn – 3rd International Marmara Sciences Congress, 1 – 3 November 2019, Kocaeli, Turkey (oral presentation)
Sub-Surface Microstructural and Mechanical Properties of Ti6Al4VAlloy Shot Peened under Different Parameters
Avcu Y.Y., Yetik O., Iakovakis E., Guney M., Avcu E., Sinmazcelik T.
IMASCON 2019 Autumn, 1 – 3 November 2019, Kocaeli, Turkey (oral presentation)
The Effect of Glass Beads on the Shot Peening Properties of AA7075 Al Alloy
Cubuk A.B., Avcu Y.Y., Gonul B., Yetik O., Kocoglu H., Ergun R.E., Avcu E.
2nd International Marmara Sciences Congress (IMASCON), 26-28 April 2019, Kocaeli, Turkey (oral presentation)
The Effect of Shot Size and Shot Impingement Angle on the Weight Loss ans Surface Roughness of Shot Peened AA7075 Aluminum Alloy
Gonul B., Yetik O., Cubuk A.B., Avcu Y.Y., Kocoglu H., Ergun R.E., Avcu E.
2nd International Marmara Sciences Congress (IMASCON), 26-28 April 2019, Kocaeli, Turkey (oral presentation)
2016
Effects of erodent particle size and acceleration pressure on the surface topography of Ti6Al4V alloy in microblasting process
Yetik O., Yildiran Y., Yavuzyegit B., Avcu E.
16th International Materials Symposium (IMSP’2016), 12-14 October 2016, Denizli, Turkey (oral presentation)
Effects of particle impingement angle and acceleration pressure on the 3D surface topography of monolithic zirconia
Avcu E., Harbelioglu E.
16th International Materials Symposium (IMSP’2016), 12-14 October 2016, Denizli, Turkey (poster presentation)
Influences of shot size on the surface roughness morphology and 3D surface topographies of AA7075 aluminium alloy in shot peening
Avcu E., Harbelioglu E.
16th International Materials Symposium (IMSP’2016), 12-14 October 2016, Denizli, Turkey (poster presentation)
Effects of shot peening parameters on the surface properties of Ti6Al4V alloy
Yildiran Y., Yetik O., Yavuzyegit B., Avcu E.
16th International Materials Symposium (IMSP’2016), 12-14 October 2016, Denizli, Turkey (poster presentation)
The effects of erodent particle size and acceleration pressure on the 3D surface topography and surface properties of conventional zirconia
Yavuzyegit B., Yetik O., Yildiran Y., Pekkan G., Saridag S., Avcu E.
16th International Materials Symposium (IMSP’2016), 12-14 October 2016, Denizli, Turkey (oral presentation)
The influences of the erodent particle size on the surface roughness parameter and 3D surface topography of blast cleaned Ti6Al4V alloy
Avcu E., Yildiran Y., Sinmazcelik T.
28th International Conference on Advances and Trends in Engineering Materials and their Applications (AES ATEMA), 20-24 June 2016, Montreal, Canada (oral presentation)
The influences of the erodent particle size distribution on the solid particle erosion of Ti6Al4V alloy
Avcu E., Yildiran Y., Sinmazcelik T.
28th International Conference on Advances and Trends in Engineering Materials and their Applications (AES ATEMA), 20-24 June 2016, Montreal, Canada (oral presentation)
The effects of nozzle design on the particle impingement velocity and erosion rate in sand blasting process
Onen B., Yildiran Y., Avcu E., Cinar A.
1st International Conference on Engineering Technology and Applied Sciences, 21-22 April 2016, Afyon, Turkey (poster presentation)
The effects of nozzle design on the surface roughness of target material
Onen B., Yildiran Y., Avcu E., Cinar A.
1st International Conference on Engineering Technology and Applied Sciences, 21-22 April 2016, Afyon, Turkey (oral presentation)
Before 2016
Pull-out strength different diameter fiber posts to different type self-adhesive luting cements
Saridag S., Yigit-Helvacioglu D., Avcu E., Kiziltas S.G., Ozcan M.
TDA International Congress on Istanbul, 28-30 November 2015, Istanbul, Turkey (oral presentation)
Micro-CT evaluation of dentine defect formation during re-treatment with hand rotary instruments
Yilmaz A., Yigit-Helvacioglu D., Gur C., Ersev H., Kiziltas S.G., Avcu E., Baydemir C., Abbot P.
17th Biennial European Society of Endodontology Congress, 16-19 September 2015, Barcelona, Spain (oral presentation)
Investigation of solid particle erosion mechanisms by using tilt angle SEM view methodology
Avcu E., Yildiran Y., Sinmazcelik T.
22nd International Conference on Advances and Trends in Engineering Materials and their Applications (AES ATEMA), 15-19 June 2015, Montreal, Canada (oral presentation)
Investigation of erodent particle embedding in solid particle erosion of Ti6Al4V Alloy
Yildiran Y., Avcu E., Sinmazcelik T.
22nd International Conference on Advances and Trends in Engineering Materials and their Applications (AES ATEMA), 15-19 June 2015, Montreal, Canada (oral presentation)
Dry sliding wear behaviour of high Cr and Mn Alloyed Cast Alloys
Aktas G., Yildiran Y., Yoruk M.C., Avcu E.
2nd International Iron & Steel Symposium, 01-03 April 2015, Karabük, Turkey (oral presentation)
The effects of erodent particle properties on the erosion behaviour of Ti6Al4V alloy
Balyali H.A., Kocoglu H., Harbelioglu E., Yildiran Y., Avcu E., Sinmazcelik T.
15th International Materials Symposium (IMSP’2014), 15-17 October 2014, Denizli, Turkey (oral presentation)
The effects of shot peening methods and shot size on the surface roughness of spring steel
Yildiran Y., Avcu E., Olmez S., Demir I., Guven A.T., Sinmazcelik T.
15th International Materials Symposium (IMSP’2014), 15-17 October 2014, Denizli, Turkey (poster presentation)
Residual flexural properties of solid particle eroded TiO2/PPS composites
Bora M.O., Coban O., Avcu E., Fidan S., Sinmazcelik T.
14th International Materials Symposium (IMSP’2012), 10-12 October 2012, Denizli, Turkey (oral presentation)
The influence of antibiotic impregnation on the scratch behaviour of bone cement (PMMA)
Bora M.O., Coban O., Fidan S., Avcu E., Sinmazcelik T.
14th International Materials Symposium (IMSP’2012), 10-12 October 2012, Denizli, Turkey (oral presentation)
Influence of low-velocity drop weight impact test parameters on impact damage mechanisms of polymer composites
Fidan S., Avcu E., Bora M.O., Coban O., Sınmazçelik T.
14th International Materials Symposium (IMSP’2012), 10-12 October 2012, Denizli, Turkey (oral presentation)
Use of volcanic ash as an alternative filler material in PPS composites for thermal and viscoelastic properties
Coban O., Bora M.O., Avcu E., Fidan S., Sinmazcelik T., Ersoy O.
14th International Materials Symposium (IMSP’2012), 10-12 October 2012, Denizli, Turkey (oral presentation)
Thermal and viscoelastic properties of TiO2/PPS composites
Avcu E., Coban O., Bora M.O., Fidan S., Sınmazcelik T.
14th International Materials Symposium (IMSP’2012), 10-12 October 2012, Denizli, Turkey (oral presentation)
Computerized tomography characterization of low velocity impact damage in glass fiber reinforced polyester composite
Avcu E., Fidan S., Bora M.O., Coban O., Sinmazcelik T.
14th International Materials Symposium (IMSP’2012), 10-12 October 2012, Denizli, Turkey (oral presentation)
Effects of repeated impact frequency on glass fibre reinforced polyester composite during impact loading
Fidan S., Avcu E., Coban O., Bora M.O., Sinmazcelik T.
14th International Materials Symposium (IMSP’2012), 10-12 October 2012, Denizli, Turkey (oral presentation)
Effects of particle size, particle impingement angle, and particle pressure on solid particle erosion behavior of alumina ceramics
Sahin A.E., Yildiran Y., Avcu E., Fidan S., Sinmazcelik T., Gunay V.
14th International Materials Symposium (IMSP’2012), 10-12 October 2012, Denizli, Turkey (oral presentation)
Effects of particle size and particle impingement angle on solid particle erosion behavior of Ti6Al4V alloy
Yildiran Y., Sahin A.E., Avcu E., Fidan S., Sinmazcelik T.
14th International Materials Symposium (IMSP’2012), 10-12 October 2012, Denizli, Turkey (poster presentation)
Solid particle erosive wear behavior of ductile, semi-ductile and brittle materials: Influence of particle impingement angle and velocity
Avcu E., Fidan S., Bora M.O., Coban O., Sinmazcelik T., Taskiran I.
9th International Conference on Advances and Trends in Engineering Materials and their Applications (AES-ATEMA), 1-5 August 2011, Montreal, Canada (oral presentation)
Detecting impact damages in an aramid/glass fiber reinforced hybrid composite with micro tomography
Fidan S., Sinmazcelik T., Avcu E., Bora M.O., Çoban O.
International Conference on Advances in Materials and Processing Technologies (AMPT), 13-16 July 2011, Istanbul, Turkey (oral presentation)
Process optimization by design of experiments: micro-compounding and injection molding of PPS composites
Coban O., Bora M.O., Ozcan B., Avcu E., Sinmazcelik T.
International Conference on Advances in Materials and Processing Technologies (AMPT), 13-16 July 2011, Istanbul, Turkey (oral presentation)
Processing of a novel fibre metal laminates: the effect of circular hole formations on flexural properties
Bora M.O., Coban O., Fidan S., Avcu E., Sinmazcelik T., Curgul I.
International Conference on Advances in Materials and Processing Technologies (AMPT), 13-16 July 2011, Istanbul, Turkey (oral presentation)
Solid particle erosive wear behavior of glass mat reinforced thermoplastics: influence of erodent particle size, particle impingement angle and pressure
Avcu E., Fidan S., Bora M.O., Coban O., Taskiran I., Sinmazcelik T.
International Workshop on Thermoplastic Matrix Composites (THEPLAC), 23-24 June 2011, Lecce, Italy (oral presentation)
The influence of different circular hole formations on tensile properties of a novel fiber metal laminates
Bora M.O., Coban O., Avcu E., Fidan S., Sinmazcelik T., Curgul I.
International Workshop on Thermoplastic Matrix Composites (THEPLAC), 23-24 June 2011, Lecce, Italy (oral presentation)
Effect of mixed particles reinforcing on the thermal, mechanical and morphologıcal properties of PPS composites
Coban O., Bora M.O., Avcu E., Taskiran I., Sinmazcelik T.
International Workshop on Thermoplastic Matrix Composites (THEPLAC), 23-24 June 2011, Lecce, Italy (oral presentation)